Borehole log drill well logger geotechnical geodesy software from Geosoft VN

Enjoy a Better Borehole Logger - Logman 8.0.1

2006-10-06T16:47:35Z

There are no translations available.

There's a lot of things to do on the borehole logger & fence, and Logman 8.0 is full of helpful features to make your time work more productive.

Programed by geotechnical engineers, who know what you need. Different from other geotechnical softwares, which have only one copy of a version, we can make more copies for customer. GeoSoftVN believe that Users are quite right. We will bring you all we have!

All are tables data

We love table (data sheet) as much as you do, so Logman 8.0 will open data on more table. Borehole log table, lithology table, cross data table and more...

Less data input

A common Lithology for all Boreholes, so do not worry. All thing can be input on each other Borehole log's data. More combo data with customization.

Smart join layer

Logman 8.0 is a smart (join layer), quick, easy-to-use program. It manages data in only one file including the information of project, borehole logs, cross and option of drawings. There are no limit for the number of borehole log and cross that can be created. Logs can contain general borehole data (eg. location, client, project number); lithology descriptions and symbols; sample data and water level . Cross can be imported from Autocad drawings, which is very useful when user has data drawings by Acad (eg. SoftDesk, Topo, Nova). Imagine a cross with thousand data points

More AutoCad pattern

LOGman have over 150 pattern of lithology for borehole log.

Quick AutoCad borehole log & cross section

With Autocad version form 2000 to 2008

And more...

LOGMAN 8.0 GETTING STARTED
LOGMAN's MAIN INTERFACE
LOGMAN's ORDER TO INPUT DATA AND CREATE THE DRAWING OF BOREHOLE LOG
LOGMAN's GENERAL PRINCIPLE TO INPUT DATA

Free borehole log demo download

LOGMAN 8.0 GETTING STARTED

2006-10-06T16:47:35Z

There are no translations available.

Before you begin working with the LM8 program;
Check the contents of your distribution package;
Make sure you have the necessary equipment;
Run the installation program;
Then Start the LM8 program

Installing LogMan

The installation of the LogMan program will depend upon the type of operating system. Before installing the program make sure you have received the entire distribution package and that you have the required equipment.

Required Equipment

LogMan requires the following hardware and software to run efficiently:
-    Windows 32 bit 95/98/2000/XP or NT (not include WinME)
-    At least 32 MB of RAM;
-    At least 32 MB of hard disk space;
-    A screen resolution of at least 600 x 800; ( best at 1280x1024)
-    A CD-ROM drive.

LOGMAN's MAIN INTERFACE

2006-10-10T23:16:20Z

There are no translations available.

Screen Areas

When you first start the program the main window below will be displayed. The LogMan window will look like below. This window consists of a title bar, menu bar, optional toolbars, desktop, and a status bar. In addition, popup menus can be displayed by clicking the right mouse button

Title Bar

The title bar is located at the top of the window and displays the program's name, the currently opened project, and the currently opened borehole log.

LOGMAN's GENERAL PRINCIPLE TO INPUT DATA

2006-10-10T23:16:20Z

There are no translations available.

The data of the program is very important, If you want the program to run correctly, user has to obey some following principles while inputting data in the table.
+ Input the data and its value correctly. E.g: It is impossible to input the depth of borehole by the signs such as 'abc', scale as 'def'....
+ Input enough data for creating a drawing. E.g: The cross must be Horizontal and Vertical .SCALE, the Lithology need have layers.
Notices:
It's not acceptable to have any blank row, the rows below the blank row will not be updated.

In the drawing which is input incorrectly, the data below the blank will not be updated.
+To copy borehole data to a new one, all data rows must be copied.(choose rows from its order).

Logman's FAQ

2006-10-10T23:16:20Z

There are no translations available.

FREQUENTLY ASKED QUESTIONS.

1. What is LOGman used to?
LOGman program is used to manage data for engineering geology cross of each project, set up results quickly for those surveys in the from of drawing which assists the geotechnical investigation in field of geology, engineering geology, geo-environmental engineering, transportation, mining construction.

2. Borehole log.
Now, LOGman 8.0 does not assist a lot of borehole log samples but depends on customer.

3/ Required system
Win 32 bit ( From Win 95 and later)
Install Acad 2000 and later version.
User should use Logman with speed 400 MHz 64 MB RAM and ( not compulsory)

4/ What should I do to increase the drawing speed.
You should start Acad2000 up before running LOGman (However, it is only your feeling)
LOGman wastes less time if it is drawn on a new DWG file. User should not run on current file with large size ones.

5/Which orders I need to obey?
Input strata data
Input data of borehole logs.
Establish a name of cross, Input data of terrain, put borehole into cross, update the data of that cross. Establish parameters of the cross. Therefore, draw the cross.

6/ I do not like blocks in the drawing?
The reason is that you are not used to use block, the benefit from block is huge, e.g: it is very simple to rub out the whole of elevation and depth of bottom layer or incase you want all the names of boreholes, elevation, depth, co-ordinate of hand boreholes or enlarger 1,2 on drawing, if you use block and there are a lot of other usefulness from block.

7/ I needn't use Block?
If you use Explode blocks, result only is tag, the value of attribute will have been disappeared. You must use the key Explode attributes to Text on Autocad menu Express >Blocks > Explode attributes to Text. It is OK..

8/ I want to input data more than existing rows ?
Click right mouse, choose 'Insert Row' which is also used to insert sample, other experiment.

9/ How to share data between each other project?
Logman 8 is MDI software, but can not work with more project at time, because that simple to manager data for user. The way share data is: Run two or more LogMan at one time then Copy from and Paste each other.

LOGMAN's ORDER TO INPUT DATA AND CREATE THE DRAWING

2006-10-06T16:47:35Z

There are no translations available.

The program is used by the following sequence:

Set configs (for first times only)
Project information panel
Lithology windows
Boreholes list windows
Borehole details windows
Cross windows
Set configs of drawing
Create drawing

1. Set configs
For first times to use LogMan 8.0, all configs are default. Set new value if you want, chose menu: Tools > Options. All changed will available at that time.

2. Project information panel
When begin a new project, had better if user fill complete project information. All data will be default for each other borehole or cross.